CYPE shop

CYPE Structures M76

This is the most advanced CYPE solution for the design, analysis and sizing of structures for buildings and public works, and includes 3D structures of various materials such as concrete, steel, timber and combinations of these. These tools are used to model and analyse structural connections, generate and optimise portal frame and truss geometries, and design foundations and retaining walls. They also offer solutions for the detailing of steel and reinforced concrete structures and the design of concrete frames and deep beams, ensuring code compliance and accuracy in manufacturing models.

Categories:

Includes:

13.100,00

cc

Description:

CYPE Structures M76 offers various advanced tools for designing, analysing and checking various structures. This suite is aimed at engineering and architecture professionals and provides specific solutions for steel, concrete and timber structures The modules can be used to accurately analyse structural elements, from any type of section to complex foundations and specific connections. It also facilitates dynamic and seismic analysis of buildings and ensures that all structures comply with the most stringent international codes. Each module is designed to be seamlessly integrated, providing an efficient and effective user experience. This suite excels in design accuracy, material optimisation and structural safety assurance, making it an indispensable tool for structural projects of any scale. It is the ideal choice for professionals seeking an advanced solution in the design and structural analysis of construction projects, offering the most powerful and advanced tools within the structures suite. This makes CYPE Structures M75 the most suitable choice for experts who want to maximise their effectiveness in the BIM environment.

Analysis and design according to standards

CYPE's software includes a wide range of standards from various countries around the world within its native features, allowing users to design and check their projects with greater speed and accuracy.

What's included?

14 PROGRAMS - 76 MODULES

AL9

The AL9 module allows CYPE 3D to use the extruded aluminium section editor, which is intended to facilitate the design and checking of aluminium alloy sections with special cross-sections.

APG

The APG module is compatible with CYPE 3D and allows the program to determine the critical load factors and buckling deformations of the structure for each combination analysed by solving an eigenvalue problem.

APL

With this module, users can carry out the local buckling analysis of connections in CYPE Connect and StruBIM Steel.

AUT

CYPECAD's AUT module has two options available that have been created to automatically generate the structure: Import of IFC files from CAD/BIM programs and Interpretation of DXF and DWG files.

C3D

The C3D module is the basic core of CYPECAD's tools and is required for the operation of all the program versions.

CCS

This module is used for the modelling, design and graphical documentation of connections between bars in steel structures, in StruBIM Steel and CYPE Connect.

CCT

This CYPE Connect module is used for modelling, analysing and graphically documenting the connections between bars in timber structures.

CIS

Transversal module available for several CYPE applications that allows users to export to the standard CIS/2 interchange format to facilitate the data flow between the apps involved in the process for the analysis, design and manufacturing of steel structures.

CNH

The CNH module is compatible with CYPECAD and is used to verify the requirements for the seismic design of reinforced concrete nodes.

E11

This module allows users to export to IFC EM. 11 in StruBIM Steel.

ECL

The ECL module is compatible with CYPECAD and allows the program to analyse and design the reinforcement of stair slabs as isolated elements of the structure.

ECZ

EEC

The CYPECAD module EEC allows users to carry out a dynamic analysis of buildings exposed to seismic loads, which includes the effect of the non-structural building elements used in the façades and partitions of a building.

ENZ

Using the ENZ module, CYPECAD and CYPE 3D can design foundations resolved using piles with their respective pile caps. This module also designs strap and tie beams spanning between the pile caps.

FPT

The CYPECAD module FPT, allows users to design the passive reinforcement of waffle slabs, in-situ joist floor slabs and their perimeter beams.

GEP

The GEP module is the basic module for using the Portal frame generator program and is a prerequisite for its operation. Geometry can be generated and loads can be applied on industrial warehouse-type structures, purlins can be analysed and the geometry and loads can be exported to CYPE 3D.

IFR

This module allows users to export reinforcement detailing from StruBIM Rebar to IFC and BVBS formats.

ITE

ITE is a CYPECAD module that allows users to consider the settlements of the foundations and their interaction with the rest of the structure, in terms of both forces and deformation, by defining elastic stiffness constants in foundation elements.

LFL

The LFL module allows CYPECAD to analyse and design mat foundations and foundation beams accurately and in accordance with structural design standards.

LMA

The LMA module is compatible with CYPECAD and allows the program to analyse and design flat slabs.

LMX

The LMX module is compatible with CYPECAD and allows the program to analyse and design composite slabs ("steel deck").

LPS

CYPECAD's LPS module has been designed to carry out the design of the passive reinforcement of post-tensioned slabs, using the forces that have been obtained from analysing the post-tensioned tendons (bonded or unbonded), whose properties have been introduced by the program users.

M3D

The M3D module is the basic core of the CYPE 3D tools and is required for the operation of all program versions. When combined with C3D, it facilitates the connection between structures designed in CYPE 3D and CYPECAD by means of the "Integrated 3D Structures" feature.

MAD

Using the MAD module, CYPECAD and CYPE 3D analyse and design timber beams and generic bars.

MAP

The MAP module is compatible with CYPECAD and allows the program to analyse and design concrete block masonry walls.

MAR

The core module for using StruBIM Box Culverts and a prerequisite for running the program.

MCD

This module is used in StruBIM Embedded Walls for analysing and tracing slip circles in the global stability check.

MEN

The MEN module allows CYPECAD to analyse and design corbels on column faces.

MLL

The MLL module is compatible with CYPECAD and allows users to include electrowelded meshes with the aim of using them in the analysis of flat slabs, as well as the detailing of these meshes and obtaining reports and drawings with their quantities.

MSG

The MSG module in CYPECAD analyses the column forces of a generic material, defined by its modulus of elasticity, Poisson's ratio and unit weight. It also evaluates the forces of generic reinforced concrete sections and verifies their longitudinal reinforcement.

MTP

CYPECAD’s module: MTP, designs reduced thickness reinforced concrete walls with a single reinforcement plane, which are used as load bearing walls to support vertical loads and also resist horizontal forces acting in the plane of the wall.

MUC

This is the core module for using StruBIM Cantilever Walls and is a prerequisite for running the program as well as purchasing other modules.

MUG

This is the core module for using StruBIM Embedded Walls and is a prerequisite for running the program, as well as acquiring other modules.

MUH

In StruBIM Embedded Walls, this module is used for the analysis, design and reinforcement of reinforced concrete walls, concrete piles and mini piles.

MUS

The MUS module is compatible with CYPECAD and allows the program to analyse and design concrete walls and masonry walls.

MUT

In StruBIM Embedded Walls this module is used for the analysis and design of steel sheet piles from the "ArcelorMittal" catalogue and steel sheet piles with generic sections.

NLD

The NLD module is compatible with CYPE 3D and allows the program to perform non-linear analyses of supports with uplift.

NLR

This module allows users to insert plastic hinges into bars in CYPE 3D.

NLT

The NLT module is compatible with CYPE 3D and allows the program to perform the non-linear analysis of bars that work only in tension.

OSP

It is a transverse module available for several CYPE applications that activates the operation of the OpenSees (Open System for Earthquake Engineering Simulation) analysis engine for linear and non-linear structural analysis.

PAN

The PAN module allows users to analyse and design reinforced concrete shear walls in CYPECAD.

PHA

Using the PHA module, CYPECAD and CYPE 3D design rectangular and circular reinforced concrete columns.

PLA

With the PLA module, CYPECAD and CYPE 3D can design, edit and check welded baseplates for any steel column layout and any type of material (rolled, reinforced and cold formed steel).

PMD

With the PMD module, CYPECAD can analyse and design rectangular and circular section timber columns.

PMT

With the PMT module, steel columns can be introduced into CYPECAD so that they can be designed and built up according to the code selected.

PMX

Using the PMX module, CYPECAD and CYPE 3D design composite steel and concrete columns composed of rectangular or circular concrete columns with an encased steel section, Rolled steel plate box sections, filled with concrete; rectangular, square and circular hollow sections filled with concrete.

PPA

The PPA module is compatible with CYPECAD and allows the program to analyse and design hollow core floor slabs.

PUN

With the PUN module, CYPECAD checks the Failure Limit State of concrete for punching shear in flat slabs, waffle slabs and mat foundations using two methods.

Q04

With the Q04 module and computers equipped with several parallel processors, users can save a significant amount of time in the analysis process of the associated programs.

RET

The RET module is used to analyse and design waffle slabs in CYPECAD.

RMP

The RMP module is compatible with CYPECAD and allows the program to analyse and design ramp slabs as isolated elements of the structure.

SBA

The CYPE Connect Anchors - Concrete anchors module is used for designing anchors and is compatible with both CYPE Connect and StruBIM Steel. It is also used as a license to work with StruBIM Anchors ACI 318, for checking anchors in concrete elements based on the ACI standard.

SDV

This module is used by StruBIM Shear Walls to design and check diagonally braced coupling beams.

SDW

This is the core module for using StruBIM Shear Walls and is a prerequisite for running the program, as well as acquiring other modules.

SI6

The SI6 module carries out, in CYPECAD and CYPE 3D, the fire resistance check and design of sections or protection cover depending on the material in question.

SPD

Using this module in StruBIM Steel, it is possible to create sheets of elements and parts (sections and plates), assembly sheets, connection sheets and sheets with the general views of the model.

SRC

This is the core module for using StruBIM Rebar and is a prerequisite for running the other modules.

SRV

This module is used for importing coupling beams designed and analysed with StruBIM Shear Walls into StruBIM Rebar to generate their reinforcement detailing.

SRW

This module is used for importing shear walls designed and analysed with StruBIM Shear Walls into StruBIM Rebar to generate their reinforcement detailing.

SRZ

This module is used to import footings designed and analysed with CYPECAD into StruBIM Rebar to generate their reinforcement detailing.

UN1

The module "UN1" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section welded connections (including baseplates).

UN2

The module "UN2" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section bolted connections.

UN4

The module "UN4" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common bolted connections of rolled and welded steel I sections in building frames.

UN5

The "UN5" module for CYPECAD, its Integrated 3D structures and CYPE 3D, carries out an automatic analysis and design of coplanar hollow structural section connections, like those which are usually provided in flat trusses.

UNF

The UNF module is compatible with CYPECAD and allows the program to analyse and design reinforced and prestressed precast joist floor slabs.

UNI

Using the UNI module, users can analyse and design generic concrete joist floor slabs.

UNM

The UNM module is compatible with CYPECAD and allows the program to analyse and design floor slabs with steel joists or open-web joists.

UNS

The UNS module is compatible with CYPECAD and allows users to analyse and design joist floor slabs with joists fully assembled on site.

USE

The module "USE" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common welded connections of rolled and welded steel I sections in building frames.

UVM

Using the UVM module, CYPECAD analyses and designs timber joist floor slabs.

VGT

This module is used to carry out the design of deep beams in StruBIM Deep Beams.

VHA

The VHA module is for use in CYPECAD and CYPE 3D and allows users to introduce and design various types of concrete beams.

VMT

With the VMT module, the following types of beams can be introduced and designed: steel beams below a floor slab or aligned with its upper face and composite steel beams linked to the floor slab with connectors.

ZAP

In CYPECAD and CYPE 3D, the ZAP module can be used to design foundations made of reinforced concrete rigid footings or mass concrete footings, either isolated or combined, tie and strap beams between footings and, in CYPECAD, strip footings for walls.

ZCA

In CYPECAD, the ZCA module is used to design foundations with special element intersections, establish polygonal limits of footings, and apply loads on footings, pile caps and strap and tie beams. In CYPE 3D, it facilitates the layout of polygonal limits for footings.

CP1

With this module, the CYPECAD, CYPE 3D and Foundation elements programs can calculate the sinking load in deep foundations using reinforced concrete piles.

icono del programa

CYPECAD

CYPECAD is a BIM application for the design, analysis, and sizing of structures for building and civil works, which are subject to vertical and horizontal forces, as well as fire exposure.

icono del programa

CYPE 3D

CYPE 3D is an agile and efficient program created for the analysis and design of three-dimensional structures with elements made of concrete, steel, composite concrete and steel, aluminium, timber, or any other material, and includes the sizing of connections (welded and bolted connections of rolled and welded steel I sections and hollow structural sections) and their foundations with baseplates, footings, pile caps, and strap and tie beams.

icono del programa

CYPE Connect

CYPE Connect can model and analyse, in addition to steel element connections, connections between timber structural elements as well as steel-to-timber connections, using the finite element method. This application uses the OpenSees calculation engine.

icono del programa

CYPE Connect Classic

CYPE Connect Classic is a program for designing, checking, and generating the detailing and reports of welded and bolted connections with rolled and reinforced rolled-I sections; welded connections of circular hollow sections; and welded baseplates of steel columns.

icono del programa

StruBIM Steel

StruBIM Steel is a program developed for the creation and maintenance of BIM models for structural steel detailing.This program allows users to create a precise BIM model that includes the necessary elements (sections, plates, bolts, butt welds and anchorage) to define the structure. For the results output the program provides shop drawings in DSTV format.

icono del programa

Portal frame generator

Geometric generation of rigid portal frames and simple and multiple trusses. Automatic generation of wind and snow loads. Design and optimisation of roof and lateral purlins. Exports the geometry and loads to the program CYPE 3D.

icono del programa

StruBIM Shear Walls

StruBIM Shear Walls is a program with which users can design and check shear walls in accordance with the ACI 318-11, ACI 318-14, NTC-RSEE 2017, Eurocode 2 and Eurocode 8 codes.

icono del programa

StruBIM Embedded Walls

StruBIM Embedded Wall is an application for designing and checking different types of embedded walls (diaphragm walls, piled retaining walls, mini piled retaining walls, steel pile walls and generic embedded walls) for building and public works.

icono del programa

StruBIM Cantilever Walls

StruBIM Cantilever Walls is a program created to design and check reinforced concrete cantilever walls for retaining soil. It automatically carries out the pre-design of the geometry, the analysis of the elevation reinforcement and the geometrical and reinforcement design of the wall footing.

icono del programa

StruBIM Box Culverts

StruBIM Box Culverts is an application for designing and checking the compliance of reinforced concrete frames that are rectangular or trapezoidal, or single or multi-cell, for underpasses under roads and for drainage works.

icono del programa

StruBIM Rebar

StruBIM Rebar is a program with which users can model the reinforcement of reinforced concrete structural elements in the BIM model.

icono del programa

StruBIM Deep Beams

StruBIM Deep Beams is a tool for the design of deep beams. This application is integrated in the Open BIM workflow using the IFC standard.

icono del programa

Foundation elements

Foundation elements designs several types of foundation elements: pile caps, baseplates, footings and strap beams. The program can automatically design and analyse the dimensions of the foundation element and reinforcement, as well as check the input of data, among other tasks.

icono del programa

StruBIM Uploader

"StruBIM Uploader" is an application developed by CYPE, with which structural models can be incorporated into Open BIM projects that are located on the BIMserver.center platform, and this way enabling a connection with visualisation, analysis and post-processing programs of other developers.

Need professional advice for this purchase?

Other products

Scroll to Top