- Home
- Price list
- CYPE AEC COLLECTION M120
CYPE AEC COLLECTION M120
CYPE AEC COLLECTION M120 is a BIM solution for structural design, MEP sizing and project management.
$17,839.00
Description:
Integration with other BIM project disciplines
The projects developed in this tool can be integrated and made compatible with other project disciplines, thanks to the Open BIM workflow established via the use of the BIMserver.center platform.
What's included?
48 PROGRAMS - 120 MODULES
ACB
This module can use the AcouBAT by CYPE program, a tool developed by CYPE and the French organisation CSTB (Centre Scientifique et Technique du Bâtiment) to study the acoustic insulation and conditioning of any type of building
ACG
This module allows users to carry out acoustic insulation checks according to the calculation method described in the EN 12354 (ISO 15712) standards in CYPESOUND.
AL9
The AL9 module allows CYPE 3D to use the extruded aluminium section editor, which is intended to facilitate the design and checking of aluminium alloy sections with special cross-sections.
APG
The APG module is compatible with CYPE 3D and allows the program to determine the critical load factors and buckling deformations of the structure for each combination analysed by solving an eigenvalue problem.
APL
With this module, users can carry out the local buckling analysis of connections in CYPE Connect and StruBIM Steel.
APT
This module can be used to carry out the numerical analysis of linear thermal bridges in accordance with ISO 10211 in CYPETHERM EPlus and CYPETHERM BRIDGES.
AQ1
With this module, quantity lines can be obtained from DXF or DWG files in Arquimedes. Also, it allows users to import the quantities acquired in the CAD programs Allplan®, ArchiCAD® and +Extended® (AutoARQ).
ARQ
This module is the basic core of the Arquimedes tools and is needed to run all versions of the program.
ART
This module is used to select and use air-source heat pump systems in the systems developed in CYPEHVAC.
AUT
CYPECAD's AUT module has two options available that have been created to automatically generate the structure: Import of IFC files from CAD/BIM programs and Interpretation of DXF and DWG files.
BDR
This module is used to manage the simultaneous access to the same database (bills of quantities or cost databases) for several users connected in a network by means of a configuration of permissions and access modes.
C3D
The C3D module is the basic core of CYPECAD's tools and is required for the operation of all the program versions.
CAA
This module is used to analyse and design air ducts in HVAC systems in CYPEHVAC and CYPEHVAC Ductwork.
CCS
This module is used for the modelling, design and graphical documentation of connections between bars in steel structures, in StruBIM Steel and CYPE Connect.
CCT
This CYPE Connect module is used for modelling, analysing and graphically documenting the connections between bars in timber structures.
CDP
This module of Arquimedes allows for several existing bills of quantities to be included in a base bill of quantities, and maintain the link between the incorporated items and their original bills of quantities.
CIS
Transversal module available for several CYPE applications that allows users to export to the standard CIS/2 interchange format to facilitate the data flow between the apps involved in the process for the analysis, design and manufacturing of steel structures.
CND
This module is used to check for the existence of surface and interstitial condensation in accordance with ISO 13788 in CYPETHERM EPlus and CYPETHERM HYGRO.
CNE
This module can be used with Open BIM Cable Routing to perform BIM modelling of cable routing systems.
CNH
The CNH module is compatible with CYPECAD and is used to verify the requirements for the seismic design of reinforced concrete nodes.
CP1
With this module, the CYPECAD, CYPE 3D and Foundation elements programs can calculate the sinking load in deep foundations using reinforced concrete piles.
CPO
This module activates Arquimedes and Job Control, offering the same features as the basic core of Arquimedes tools, but also adding features related to the budgetary control of the job.
CRA
This module can be used to analyse and design radiators, towel rail radiators and electrical emitters in heating systems in CYPEHVAC.
CSE
This module is used to automatically estimate the execution budgets of building projects in CYPE Cost Estimator when the bill of quantities value exceeds €5,000,000.
CSP
This module is used to automatically estimate the execution budgets of building projects in CYPE Cost Estimator when the bill of quantities value exceeds €1,000,000 but is less than €5,000,000.
DCE
This module can be used with the Open BIM Switchboard program to design the distribution panels.
ECL
The ECL module is compatible with CYPECAD and allows the program to analyse and design the reinforcement of stair slabs as isolated elements of the structure.
EEC
The CYPECAD module EEC allows users to carry out a dynamic analysis of buildings exposed to seismic loads, which includes the effect of the non-structural building elements used in the façades and partitions of a building.
EMF
This module can be used with the CYPELEC MULTILINE program to draw multi-line diagrams of electrical installations.
ENZ
Using the ENZ module, CYPECAD and CYPE 3D can design foundations resolved using piles with their respective pile caps. This module also designs strap and tie beams spanning between the pile caps.
FDS
This module is used to calculate the dynamic simulation of the evolution of fires in buildings using the computational fluid dynamics model called FDS developed by NIST in CYPEFIRE FDS.
FPT
The CYPECAD module FPT, allows users to design the passive reinforcement of waffle slabs, in-situ joist floor slabs and their perimeter beams.
GCO
This module of Arquimedes allows users to calculate the supplies required to execute a job and foresee invoice payments from suppliers and subcontractors.
GEP
The GEP module is the basic module for using the Portal frame generator program and is a prerequisite for its operation. Geometry can be generated and loads can be applied on industrial warehouse-type structures, purlins can be analysed and the geometry and loads can be exported to CYPE 3D.
IEF
This module is used to design and analyse supply systems in buildings in CYPEPLUMBING ("Water Systems" tab).
IEP
This module enables the design and analysis of rainwater drainage systems in buildings to be carried out in CYPEPLUMBING ("Sanitary Systems" tab).
IES
This module is used to design and analyse solar thermal solar energy building services in CYPEPLUMBING ("Solar Systems" tab).
IET
This module can be used for the design and analysis of telecommunications installations in buildings in CYPETEL Systems and CYPETEL.
IFR
This module allows users to export reinforcement detailing from StruBIM Rebar to IFC and BVBS formats.
IFV
This module can be used with the CYPELEC PV Systems program to design and analyse electrical photovoltaic systems.
ILT
This module is used to carry out the interior lighting check in accordance with EN 12464-1 to be carried out in CYPELUX EN.
IMM
This module allows the energy audit of the building and the analysis of possible improvement measures, including the energy and economic analysis of the different alternatives, using CYPETHERM Improvements Plus and CYPETHERM Improvements.
ITE
ITE is a CYPECAD module that allows users to consider the settlements of the foundations and their interaction with the rest of the structure, in terms of both forces and deformation, by defining elastic stiffness constants in foundation elements.
LE1
This module can be used with the CYPELUX LEED program, which checks compliance with the indoor environmental quality requirements related to natural light as set out in the LEED certification.
LFL
The LFL module allows CYPECAD to analyse and design mat foundations and foundation beams accurately and in accordance with structural design standards.
LMA
The LMA module is compatible with CYPECAD and allows the program to analyse and design flat slabs.
LMX
The LMX module is compatible with CYPECAD and allows the program to analyse and design composite slabs ("steel deck").
LPS
CYPECAD's LPS module has been designed to carry out the design of the passive reinforcement of post-tensioned slabs, using the forces that have been obtained from analysing the post-tensioned tendons (bonded or unbonded), whose properties have been introduced by the program users.
M3D
The M3D module is the basic core of the CYPE 3D tools and is required for the operation of all program versions. When combined with C3D, it facilitates the connection between structures designed in CYPE 3D and CYPECAD by means of the "Integrated 3D Structures" feature.
MAP
The MAP module is compatible with CYPECAD and allows the program to analyse and design concrete block masonry walls.
MCD
This module is used in StruBIM Embedded Walls for analysing and tracing slip circles in the global stability check.
MLL
The MLL module is compatible with CYPECAD and allows users to include electrowelded meshes with the aim of using them in the analysis of flat slabs, as well as the detailing of these meshes and obtaining reports and drawings with their quantities.
MSG
The MSG module in CYPECAD analyses the column forces of a generic material, defined by its modulus of elasticity, Poisson's ratio and unit weight. It also evaluates the forces of generic reinforced concrete sections and verifies their longitudinal reinforcement.
MTP
CYPECAD’s module: MTP, designs reduced thickness reinforced concrete walls with a single reinforcement plane, which are used as load bearing walls to support vertical loads and also resist horizontal forces acting in the plane of the wall.
MUC
This is the core module for using StruBIM Cantilever Walls and is a prerequisite for running the program as well as purchasing other modules.
MUG
This is the core module for using StruBIM Embedded Walls and is a prerequisite for running the program, as well as acquiring other modules.
MUH
In StruBIM Embedded Walls, this module is used for the analysis, design and reinforcement of reinforced concrete walls, concrete piles and mini piles.
MUS
The MUS module is compatible with CYPECAD and allows the program to analyse and design concrete walls and masonry walls.
MUT
In StruBIM Embedded Walls this module is used for the analysis and design of steel sheet piles from the "ArcelorMittal" catalogue and steel sheet piles with generic sections.
NFP
This module is used to design and analyse hydraulic fire protection systems (such as fire hose reels and sprinklers) in CYPEFIRE Hydraulic Systems.
NLD
The NLD module is compatible with CYPE 3D and allows the program to perform non-linear analyses of supports with uplift.
NLT
The NLT module is compatible with CYPE 3D and allows the program to perform the non-linear analysis of bars that work only in tension.
OSP
It is a transverse module available for several CYPE applications that activates the operation of the OpenSees (Open System for Earthquake Engineering Simulation) analysis engine for linear and non-linear structural analysis.
PBE
This module can be used to perform the modelling and energy simulation of buildings with the EnergyPlus™ analysis engine.
PDS
This module can be used with the CYPEFIRE Pressure Systems program to analyse pressure differential systems designed to retain smoke in non-tight physical barriers in accordance with EN 12101-6.
PHA
Using the PHA module, CYPECAD and CYPE 3D design rectangular and circular reinforced concrete columns.
PLA
With the PLA module, CYPECAD and CYPE 3D can design, edit and check welded baseplates for any steel column layout and any type of material (rolled, reinforced and cold formed steel).
PMD
With the PMD module, CYPECAD can analyse and design rectangular and circular section timber columns.
PMT
With the PMT module, steel columns can be introduced into CYPECAD so that they can be designed and built up according to the code selected.
PMX
Using the PMX module, CYPECAD and CYPE 3D design composite steel and concrete columns composed of rectangular or circular concrete columns with an encased steel section, Rolled steel plate box sections, filled with concrete; rectangular, square and circular hollow sections filled with concrete.
PPA
The PPA module is compatible with CYPECAD and allows the program to analyse and design hollow core floor slabs.
PUN
With the PUN module, CYPECAD checks the Failure Limit State of concrete for punching shear in flat slabs, waffle slabs and mat foundations using two methods.
Q04
With the Q04 module and computers equipped with several parallel processors, users can save a significant amount of time in the analysis process of the associated programs.
RAD
This module is used to analyse and design underfloor heating and cooling systems in CYPEHVAC Radiant Floor.
RMP
The RMP module is compatible with CYPECAD and allows the program to analyse and design ramp slabs as isolated elements of the structure.
RVT
This module connects Arquimedes with Revit to obtain bills of quantities from Revit BIM models, installs a CYPE plugin in Revit to work simultaneously in both programs or just in Arquimedes, and it is the essential base module for using Open BIM Quantities.
SBA
The CYPE Connect Anchors - Concrete anchors module is used for designing anchors and is compatible with both CYPE Connect and StruBIM Steel. It is also used as a license to work with StruBIM Anchors ACI 318, for checking anchors in concrete elements based on the ACI standard.
SDF
This module is used to enable the selection and use of fan coils in air-conditioning systems made in CYPEHVAC.
SDV
This module is used by StruBIM Shear Walls to design and check diagonally braced coupling beams.
SDW
This is the core module for using StruBIM Shear Walls and is a prerequisite for running the program, as well as acquiring other modules.
SEC
This module is used to enable the selection and use of compact equipment in systems made in CYPEHVAC.
SGN
This module can be used with the Open BIM Signs program to carry out the BIM modelling of sign systems in buildings.
SI6
The SI6 module carries out, in CYPECAD and CYPE 3D, the fire resistance check and design of sections or protection cover depending on the material in question.
SIN
This module can be used in CYPEFIRE to carry out checks relating to the building's security in case of fire.
SPC
This module is the basic core of the CYPE Health and safety tools and is needed to run the program.
SPD
Using this module in StruBIM Steel, it is possible to create sheets of elements and parts (sections and plates), assembly sheets, connection sheets and sheets with the general views of the model.
SRC
This is the core module for using StruBIM Rebar and is a prerequisite for running the other modules.
SRV
This module is used for importing coupling beams designed and analysed with StruBIM Shear Walls into StruBIM Rebar to generate their reinforcement detailing.
SRW
This module is used for importing shear walls designed and analysed with StruBIM Shear Walls into StruBIM Rebar to generate their reinforcement detailing.
SRZ
This module is used to import footings designed and analysed with CYPECAD into StruBIM Rebar to generate their reinforcement detailing.
TAC
This module can be used to design and analyse water distribution pipes for HVAC systems in CYPEHVAC.
UAA
This module uses the CYPE Water Supply program to design and analyse urban water supply networks.
UN1
The module "UN1" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section welded connections (including baseplates).
UN2
The module "UN2" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out an automatic analysis and design of I section bolted connections.
UN4
The module "UN4" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common bolted connections of rolled and welded steel I sections in building frames.
UN5
The "UN5" module for CYPECAD, its Integrated 3D structures and CYPE 3D, carries out an automatic analysis and design of coplanar hollow structural section connections, like those which are usually provided in flat trusses.
UNF
The UNF module is compatible with CYPECAD and allows the program to analyse and design reinforced and prestressed precast joist floor slabs.
UNM
The UNM module is compatible with CYPECAD and allows the program to analyse and design floor slabs with steel joists or open-web joists.
UNS
The UNS module is compatible with CYPECAD and allows users to analyse and design joist floor slabs with joists fully assembled on site.
USA
This module can be used with the CYPE Sewerage program to design and analyse urban sewerage infrastructures.
USE
The module "USE" allows CYPECAD, CYPE 3D and Integrated 3D structures of CYPECAD to carry out the automatic design of the most common welded connections of rolled and welded steel I sections in building frames.
UTA
This module is used to enter and check air handling units (AHU) in air conditioning systems in CYPEHVAC and CYPEHVAC Ductwork.
VHA
The VHA module is for use in CYPECAD and CYPE 3D and allows users to introduce and design various types of concrete beams.
VMT
With the VMT module, the following types of beams can be introduced and designed: steel beams below a floor slab or aligned with its upper face and composite steel beams linked to the floor slab with connectors.
ZAP
In CYPECAD and CYPE 3D, the ZAP module can be used to design foundations made of reinforced concrete rigid footings or mass concrete footings, either isolated or combined, tie and strap beams between footings and, in CYPECAD, strip footings for walls.
CYPECAD
CYPECAD is a BIM application for the design, analysis, and sizing of structures for building and civil works, which are subject to vertical and horizontal forces, as well as fire exposure.
CYPE 3D
CYPE 3D is an agile and efficient program created for the analysis and design of three-dimensional structures with elements made of concrete, steel, composite concrete and steel, aluminium, timber, or any other material, and includes the sizing of connections (welded and bolted connections of rolled and welded steel I sections and hollow structural sections) and their foundations with baseplates, footings, pile caps, and strap and tie beams.
CYPE Connect
CYPE Connect can model and analyse, in addition to steel element connections, connections between timber structural elements as well as steel-to-timber connections, using the finite element method. This application uses the OpenSees calculation engine.
StruBIM Steel
StruBIM Steel is a program developed for the creation and maintenance of BIM models for structural steel detailing.This program allows users to create a precise BIM model that includes the necessary elements (sections, plates, bolts, butt welds and anchorage) to define the structure. For the results output the program provides shop drawings in DSTV format.
StruBIM Rebar
StruBIM Rebar is a program with which users can model the reinforcement of reinforced concrete structural elements in the BIM model.
StruBIM Box Culverts
StruBIM Box Culverts is an application for designing and checking the compliance of reinforced concrete frames that are rectangular or trapezoidal, or single or multi-cell, for underpasses under roads and for drainage works.
StruBIM Embedded Walls
StruBIM Embedded Wall is an application for designing and checking different types of embedded walls (diaphragm walls, piled retaining walls, mini piled retaining walls, steel pile walls and generic embedded walls) for building and public works.
StruBIM Cantilever Walls
StruBIM Cantilever Walls is a program created to design and check reinforced concrete cantilever walls for retaining soil. It automatically carries out the pre-design of the geometry, the analysis of the elevation reinforcement and the geometrical and reinforcement design of the wall footing.
StruBIM Deep Beams
StruBIM Deep Beams is a tool for the design of deep beams. This application is integrated in the Open BIM workflow using the IFC standard.
Foundation elements
Foundation elements designs several types of foundation elements: pile caps, baseplates, footings and strap beams. The program can automatically design and analyse the dimensions of the foundation element and reinforcement, as well as check the input of data, among other tasks.
CYPE Connect Classic
CYPE Connect Classic is a program for designing, checking, and generating the detailing and reports of welded and bolted connections with rolled and reinforced rolled-I sections; welded connections of circular hollow sections; and welded baseplates of steel columns.
StruBIM Uploader
"StruBIM Uploader" is an application developed by CYPE, with which structural models can be incorporated into Open BIM projects that are located on the BIMserver.center platform, and this way enabling a connection with visualisation, analysis and post-processing programs of other developers.
CYPEPLUMBING
CYPEPLUMBING is a program created to assist professionals in the design and analysis of water supply systems, drainage systems and solar thermal energy systems in any type of building.
CYPEHVAC
CYPEHVAC is a program for designing air conditioning systems that covers heating, ventilation and air conditioning. This tool allows users to design radiators, fan coils, boilers, heat pumps, ducted ventilation networks, heat recovery units, fans and air handling units. The application allows the necessary information to be imported from other Open BIM tools, so that both the architectural models and the results of the CYPETHERM LOADS analysis can be used in the system design.
CYPEHVAC Radiant Floor
CYPEHVAC Radiant Floor is a BIM application for designing radiant floor heating and cooling systems. The software imports architectural models developed in IFC format, where systems can be entered and designed using different tools. There are three main options offered by the program: automatically entering circuits, updating the pattern considering both obstacles and spaces; and automatically measuring the materials necessary for the complete installation of the systems.
CYPEHVAC Schematics
CYPEHVAC Schematics is a free program designed to draw the schematic diagrams of hydronic HVAC systems. The components are represented using symbols in accordance with ASHRAE standards.
CYPETHERM EPlus
CYPETHERM EPlus is an application for the simulation and modelling of buildings with EnergyPlus™.
CYPETHERM LOADS
Thermal load calculation of buildings according to the Radiant Time Series Method (RTSM), proposed by ASHRAE, integrated in the Open BIM workflow.
CYPETHERM BRIDGES
CYPETHERM BRIDGES is a program designed to determine the thermal transmittance in linear thermal bridges by solving and processing a heat transfer finite element model based on the EN ISO 10211 standard.
CYPETHERM HYGRO
CYPETHERM HYGRO is a program created to calculate the internal surface resistance factor considering the critical surface humidity and interstitial condensation in building elements. The program carries out the calculation based on the hygrothermal performance of building components and building elements in accordance with the analysis method of the ISO 13788:2012 standard.
CYPETHERM Improvements
CYPETHERM Improvements is a tool for energy audits and analysis of improvement measures in buildings.
CYPETHERM Improvements Plus
CYPETHERM Improvements Plus is a program designed to carry out the energy audit of buildings and analysis of possible improvement measures, with an energy and economic study of the different alternatives, aimed at connecting with CYPETHERM programs with the EnergyPlus™ analysis engine (CYPETHERM EPlus, CYPETHERM HE Plus and CYPETHERM SCE-CS Plus).
CYPELUX
CYPELUX is a free tool created to calculate the lighting levels of normal and emergency lighting installations.
CYPELUX EN
CYPELUX EN allows users to verify the lighting requirements proposed in standard EN 12464-1, depending on the type of activity, for indoor work places.
CYPELUX LEED
CYPELUX LEED is an application that helps users to comply with Indoor Environmental Quality (IEQ) requirements regarding natural light defined by the LEED (Leadership in Energy & Environmental Design). More specifically, the program verifies LEED v4.0 IEQ CREDIT 8.1 using option 2 (Simulation: Illuminance analyses).
CYPESOUND
Design and verification of the sound insulation against airborne noise and impact noise, sound immission and reverberation level.
CYPETEL Systems
CYPETEL Systems is an Open BIM programme for designing telecommunications installations in buildings. The tool can import architectural models in IFC formats, on the basis of which technicians will design telecommunications installations by introducing the different components and taking into account the design criteria defined in different codes. These criteria are automatically checked in the programme.
CYPETEL
CYPETEL is used for the design and analysis of telecommunications installations, and includes manufacturers' catalogues. The program allows users to configure infrastructure and network diagrams and create graphical compositions of installation details. It also includes an option for importing the values and characteristics of predefined codes, and for defining checks for codes that are not included.
CYPELEC
CYPELEC is a program created for designing low voltage electrical systems. CYPELEC includes different programs according to the applicable standards: CYPELEC Core, CYPELEC REBT, CYPELEC NF and CYPELEC RETIE.
CYPELEC PV Systems
CYPELEC PV Systems is a tool to assist users in the design of on-grid photovoltaic systems (amongst which are self-consumption installations) or off-grid photovoltaic systems.
CYPELEC MULTILINE
CYPELEC MULTILINE is a program designed to draw, manually or automatically, the multiline diagram of an electrical installation.
CYPEFIRE
Validation of basic fire safety rules. Passive protection (compartmentalization, evacuation, external propagation, etc.) and active protection (extinguishers, detectors, etc.).
CYPEFIRE FDS
CYPEFIRE FDS is an application for the design of complex building models, to carry out simulations of fire evolution using the Fire Dynamics Simulator developed by the NIST (National Institute of Standards and Technology, USA).
Open BIM Switchboard
Open BIM Switchboard has been created to design the enclosures that are present in electrical systems (cabinets, panels and switchboards).
Open BIM Cable Routing
Open BIM Cable Routing is a program designed for the BIM modelling of cable routing systems. The tool allows users to spatially lay out manufacturers' solutions for cable routing, both for electrical cables and telecommunication cables, in a three-dimensional work environment.
CYPEFIRE Hydraulic Systems
CYPEFIRE Hydraulic Systems is a tool created to design hydraulic networks for fire protection using sprinklers and fire hose reels in accordance with the NFPA®13 (National Fire Protection Association) standard.
CYPEFIRE Pressure Systems
CYPEFIRE Pressure Systems designs pressure differential systems to retain smoke in non-airtight physical barriers, in accordance with the EN 12101-6 code.
CYPE Water Supply
CYPE Water Supply was created for the analysis, design, checking and automatic sizing of meshed, branched and mixed water supply networks. It can also read digital terrain models in IFC4 format.
CYPE Sewerage
CYPE Sewerage was created for the analysis, design, checking and automatic sizing of branched sewerage networks with a single discharge point, the purpose of which is to evacuate water from collector wells to the discharge point. It can also read digital terrain models in IFC4 format.
CYPE Gas Supply
CYPE Gas Supply is a program for the design of gas distribution networks in urban infrastructures. The application is capable of importing IFC files containing topographic data to facilitate the laying of the distribution network and has tools that automatically carry out both the dimensioning of the network and the generation of graphic documentation related to the installation of the network.
Arquimedes
Arquimedes is a job management tool that allows all kinds of cost estimations to be carried out in a project: its quantities, certifications, multiple technical documents associated with the project, as well as the planning and job control during the construction process.
Open BIM Quantities
Open BIM Quantities is a tool for extracting quantities and creating bills of quantities based on BIM models that have been defined using the IFC standard.
CYPE Cost Estimator
CYPE Cost Estimator has been created to automatically estimate the execution cost of a construction project during its preliminary phases, in a simple and practical way, using a fast, efficient and precise design model, by taking into account the built surface, height of the building, and typological, construction, geographic and socioeconomic factors.
CYPE Health and safety
CYPE Health and Safety is a program that has been created to assist users in the development of drawings of collective protection elements to be incorporated into the project. It also exports the quantities of the elements that have been entered, in FIEBDC-3 format, so they can be used in quantity surveying software.
Open BIM Model Checker
Open BIM Model Checker is an application developed to analyse and inspect BIM models. The aim of this program is to help users detect issues in the models, locate clashes between the different disciplines and consult the project’s documents quickly and easily.
AcouBAT by CYPE
AcouBAT by CYPE is a tool developed by CYPE and the CSTB (Centre Scientifique et Technique du Bâtiment) with the aim to help users study the sound insulation and absorption of buildings. It calculates the indices that evaluate the insulation of airborne sound (indoor and outdoor), impact sound insulation and the reverberation level in indoor spaces, in accordance with the procedure contained in the EN ISO 12354:2017 code.
Open BIM Signs
Open BIM Signs is a program developed to assist project specialists in the BIM modelling of signage solutions for buildings, based on the manufacturers' catalogues available in the program.